Products

Description

• IFD (Inverter Frequency Drive): vector modulation function for generic applications (V/F pattern)
• VTC (Vector Torque Control): sensorless vector function for high torque performance applications (direct torque control)
• FOC (Field Oriented Control): vector function with encoder for high torque precision and wide speed range
• SYN (Synchronous): vector function for brushless synchronous motors with permanent magnets characterized by high torque precision joined to high energy effi ciency level.
• RGN (Regenerative): sinusoidal cos =1, AC/DC supplier function for direct supply of a series of drives
• Automation applications enclosed into the inverters of the SINUS PENTA series allow a simple and inexpensive management of SERVODIAMETERS, MULTIPUMP systems, ELECTRICAL AXIS motor systems and MULTIPOSITIONERS
• One product, 5 functions
• Vectorial modulation IFD functionality for general-purpose applications (V/f pattern)
• Sensorless vectorial VTC functionality for high torque – demanding applications (direct torque control)
• Vectorial FOC functionality with an encoder for accurate torque requirements and a wide speed range
• Vectorial SYN functionality for applications with brushless, synchronous motors with permanent magnets, requiring very accurate torque values and excellent energy performances
• RGN functionality for the inverter application as an AC/DC converter for the DC supply of multiple drives
• PC-compiled software for the programming of more than 20 application functions (in that case, an optional board is required)
• Integrated fi lters on the full range in compliance with EN61800-3 2nd ed. about RFI emission limits
• STO (Safety Torque Off) function with SIL2 safety level as defi – ned in IEC61508:2000 and Cat.3 as in EN95-1
• Compact dimensions
• Intelligent cooling system
• Integrated braking chopper up to S30
• Operating parameters saved to remotable module and possibility of parameter transfer to multiple inverters
• Lower motor noise with carrier frequency up to 16kHz (IFD and LIFT software)
• Motor PTC thermal probe control
• Easy commissioning with preset parameters for the most common applications
• Control panel with 12 keys and large back-lit LCD
• Regulation of output frequency from 0 to 1000Hz
• In case of power failure, total control of the motor, down to 0 RPM
• Master-slave function for the operation of several motors connected to the same drive shaft (VTC and FOC)
• Automatic calibration for motor parameters’ acknowledgement
• 200% max torque
• PID Function/ Secondo PID Function / 2-zone PID
• Skip frequency
• Integrated digital potentiometer
• Integrated multifunctional tester
• Trip Log
• Integrated motor thermal protection
• Automatic DC braking
• Programmable multiple acceleration and deceleration ramps
• Programmable logic blocks
• Encoder feedback
• 8 programmable inputs
• 3 programmable analog inputs 0-10Vdc, 0(4)-20mA
• 2 programmable output relays with exchange contact
• 1 open collector output
• 1 digital Push-Pull output
• Auxiliary input frequency 5,000-65,000 Hz
• Auxiliary output frequency 5,000-65,000 Hz
• 3 programmable analog outputs 0-10Vdc, 0(4)-20mA
• Auxiliary voltage 24Vdc, 10Vdc
• Serial communication RS485 with MODBUS RTU protocol up to 38.400 Baud
• Programmable S ramps
• Special executions:
• 12 impulse bridge: starting from the S65 size, it is possible to supply the drive on 12 impulse bridge configuration.